Be in control of your sound with the diverse assortment of Ernie Ball volume pedals. A performance must-have, a volume pedal allows you to control the level of output coming out of your amp using a passive foot controllable device. A staple on any pedalboard, volume pedals come in handy when you need to adjust the volume between a high energy song and a ballad during a set.

Use this guide to determine what guitar pedal you should buy.

MVP Most Valuable Pedal

P06182The Ernie Ball Most Valuable Pedal provides a super smooth foot sweep, ideal for precise volume control with no high-frequency loss at any volume. Works with both active and passive electronics, the MVP also includes a powerful gain boost allowing players to increase the audio signal up to +20 decibels. The MVP features a compact, rugged design consisting of a billet aluminum housing that is virtually indestructible. The minimum volume control allows for the heel position to be set at zero up to 50% for any rhythm level. Gain control allows for the toe position to be set at 100% up to a boosted 20+ decibels of gain for powerful lead levels. The MVP works with both active and passive audio signals.Requires DC 9V/100mA minimum power supply or 9V battery.

VP JR250 + VP JR25 Volume Pedal

P06181The VP Jr. 25k and VP Jr. 250k both feature a durable, space-efficient design that gives you more floor space. Both models’ main pivot shafts are made of center-less ground 1/2′ diameter stainless steel, precision seated though nylon bushings at
both ends. A tuner output provides silent tuning in the heel-down pedal position. A resilient Kevlar cable transmits pedal travel to the controls and is attached by stainless steel springs. The VP Jr. 250k features a micro taper switch which provides the user two distinct volume swell rates. The VP 25k pedal is perfectly voiced for active signals and features a compact, rugged design consisting of a billet aluminum housing that is virtually indestructible. Tough, long lasting Kevlar cable transmits pedal travel to the 25k potentiometer and is attached by a stainless steel spring.

 

250k Mono Volume Pedal

P06166Ernie Ball’s original full-size mono volume pedal features a super smooth foot sweep for precise volume control and is perfectly voiced for passive audio signals. Directly behind the input jack under the footplate is a micro taper switch which provides the user two distinct volume swell rates. The Ernie Ball VP 250k’s rugged construction consists of a billet aluminum housing that is virtually indestructible.

 

500k Stereo Volume/Pan 

P06165The Ernie Ball 500k Stereo Volume Pedal features a 500k potentiometer suitable for the audio path of passive or active instruments. Attached to the footplate is a switch that provides the user two distinct operating modes (volume or pan). The stereo 500k pedal is extremely versatile and can be used in stereo or mono applications. Utilizing TRS stereo cables, use the B input and B output. For use as a typical pan pedal, switch the toe tap switch to the pan position and use only the A input. The pedal will pan the signal between the A and B outputs.

25k Stereo Volume Pedal

P06167The Ernie Ball 25K Stereo Volume Pedal features a super smooth foot sweep for precise volume control and is perfectly voiced for active audio signals. The 25k pedal is extremely versatile and can be used in stereo or mono applications. Utilizing TRS stereo cables, use the B input and B output. Tough, long lasting Kevlar cable transmits pedal travel to the 250k potentiometer and is attached by a stainless steel spring.

 

Mono 250k Volume Pedal With Switch

P06168Ernie Ball’s original full-size mono volume pedal features a super smooth foot sweep for precise volume control and is perfectly voiced for passive audio signals. Attached to the footplate is an on/off switch connected to the jack labeled “Switch”. This is an isolated circuit and may be used for controlling other gear in your system like amp channel switching, effects bypass, etc.

 

 

Share this Post